Latitudes and departures computed by script show a composite tract's description failing to close by 35.99 feet, a gap the MT432 Unit 4 review pins on one transposed distance. Searches like "mt 432 unit 4 assignment example", "mt432 unit 4 sample" and "mt432 unit 4 example" land here.
What a finished MT432 Unit 4 legal description review looks like
Five pages covering three descriptions of land in the composite state of Varden. The first and longest is a metes-and-bounds tract: its four calls are transcribed, then a traverse table gives each call's bearing, distance, latitude and departure, computed by a short Python script shown in an appendix. The sums miss closure by 35.99 feet. A corrected table follows with the third call read as 415.20 feet, closing within 0.01 foot and yielding 218,534 square feet by the coordinate method. The second description uses the rectangular survey, the east half of the southwest quarter of the northeast quarter of a section, and the review computes its size at 20 acres against a recital of 40. The third, a lot-and-block reference, cites a plat that a 1988 replat superseded.
How a MT432 Unit 4 example is structured
Each description gets the test suited to its system, and the review applies them in order of difficulty. For the metes-and-bounds tract, closure is checked mathematically before anything is read into the words, because a boundary that does not return to its start cannot be located with confidence. The traverse also shows where the error sits: the misclosure runs almost due east and west, along the third call's line, pointing to a distance mistake there rather than a bearing mistake. The priority of calls then frames the correction. Monuments control over courses, courses over distances and distances over quantity, so iron pins a surveyor finds would govern, and the acreage recital, lowest in rank, serves only as corroboration. The aliquot description is checked by halving and quartering 640 acres, and the plat reference against the recorder's index.
Four calls transcribed
Bearings to the minute and distances to the hundredth, from an iron pin at the northwest corner around to the point of beginning.
The traverse as written
Latitudes and departures summing to a misclosure of 35.99 feet, nearly all of it east to west, and a precision ratio of 1 in 53.
One transposition
The third call corrected from 451.20 to 415.20 feet, closing the figure and producing 5.017 acres, which rounds to the recital's 5.02.
The rectangular survey parcel
Section 17, Township 6 North, Range 4 West, divided down to its aliquot part and found to contain 20 acres, not the 40 recited.
A plat that no longer governs
Lot 22, Block 4 cited to Plat Book 9, Page 41, although a 1988 replat at Plat Book 11, Page 7 renumbered the block.
What the review recommends
A new survey tying the tract to its monuments, a corrective description for the aliquot parcel, and a reference to the current plat.
Where marks go in MT432 Unit 4
Closure is usually the test graders apply first. A review that reads the calls for plausibility without computing latitudes and departures cannot say whether the description works, and that omission typically costs the most. Showing the calculation matters as much as the result, so a traverse table or script earns credit that a stated error figure alone does not. The priority of calls is frequently misapplied: papers letting an acreage recital override bearings and distances reverse the accepted ranking. Rectangular survey arithmetic tends to be checked carefully, since dividing a section into aliquot parts is mechanical and errors are obvious. Lot-and-block references need the plat verified, not assumed. Stronger reviews recommend a specific correction, a new survey or a corrective instrument, rather than stopping at the defect.
Get a MT432 Unit 4 example written to your instructions
Copy the Unit 4 descriptions exactly as given, with any plat or section data and the rubric. Costing nothing, the first custom review computes closure by script with a traverse table, tests each survey system on its own terms, and names the correction a title examiner would expect, all within 24-48h.
MT432 Unit 4 questions, answered
What does it mean for a metes-and-bounds description to close?
Following every call from the point of beginning should return exactly to that point. Surveyors test this by summing latitudes and departures; any remainder is the misclosure, often expressed as a ratio to the perimeter. A large error suggests a transcription mistake or a missing call, and it leaves the boundary uncertain until resolved.
How many acres are in a section of the rectangular survey?
A standard section is one mile square, 640 acres. A quarter section holds 160, a quarter of a quarter 40, and so on. Read an aliquot description from the end backward: the east half of the southwest quarter of the northeast quarter is half of a quarter of 160, which is 20 acres. Sections along township edges can vary.
Which controls if the calls in an MT432 description conflict?
Courts generally rank monuments first, then courses or bearings, then distances, then the stated quantity of land. Natural monuments usually outrank artificial ones. The ranking is a rule of construction meant to find the parties' intent, so strong evidence can override it. Check whether your course text or assigned state states the order differently.